Welcome to SHIJIAZHUANG AOMING INTERNATIONAL TRADING CO., LTD.

Ceramic Electrode (burner)

Ignition Electrodes are used for the ignition of gaseous fuel in gas combustion equipment, which works on the principle of ignition by high-voltage flashover. The central electrode must not be permanently positioned in the flame. The ignition electrode and the ionisation probe are usually positioned together in the combustion chamber of the gas combustion equipment - gas-fired boilers, instantaneous water heaters, gas ranges, cookers etc. Ignition electrodes can be used as ionisation probes and vice versa. However their layout should always be respected, i.e. the ignition electrode must be out of the flame and only the central electrode in the flame. Ignition electrodes and ionisation probes are manufactured of high-quality materials. The insulator is made of the OXAL ceramics with high Al2O3 content. Characteristic features of this material are high mechanical strength and resistance to thermal and electrical load (electric strength of the insulator is 18kV). The central electrode is made of a special fire-proof material (kanthal) which is resistant to high temperatures and electrochemical corrosion. High quality  gas ignition ceramics ignition electrode wildly using on Comercail gas burner for Boiler, Oven, with high insulation, well oxidation and impact resistant, sevice life more than 10,000 times, made by 95%AL2O3 Ceramic with glazed surface for insulating 18KV under 1300~1450 °C,center rod diam 1.6~2.0mm ferritic iron-chromium-aluminium alloy (0CR25AL5) suffer 1100~1250 °C
Ceramic Electrode (burner)
Description



Ceramic Electrode product description:


Type Ceramic   Electrode
Apply To High power gas burner
Application Ignitor carries   high-voltage ignition through electrode
Gas Source NG/LPG
Material Electrode   Body-Ceramic,95% Al2O3;Glazing or no glazing
Cable-UL1332,UL3573,UL3304,UL3257,UL1911,UL1659,UL10362 and so on.
Rod(Pin)- FeCrAl or KANTHAL
Tip Round or flat
Holder With or   without;punched or screwed
Temperature   Resistance Ceramic and Rod:≥1200℃
Cable:≤250℃
Port Shanghai  or   Ningbo

Ceramic Electrode tip:



Ceramic Electrode


Ceramic Electrode


Ceramic Electrode application area:

heavy power gas burner.jpg

Ceramic Electrode production line:

Ceramic Electrode


Ceramic Electrode


Ceramic Electrode


Ceramic Electrode


Ceramic Electrode


Our service:

1. We have been designing and owning product experience for several years.

2. Product can be customized according to customers’ requirement.

3. All the items will be strictly tested before delivery.

4. Quick response and good service.

5. We can provide free samples.

Feel free contact us for any specific requirements, also for pictures, drawings and samples of our products.

We will try our best to meet your requirements.

see more:ceramic electrode of JIPENG


We can offer a wide range of products, including gas pressure regulator, ceramic electrode (spark plug), thermocouple, air pressure switch, gas valve, ODS & pilot burner assembly, exhaust pipe, die, piezo igniter, 3-way Actuator, hydraulic group, flow sensor, 3-Bar safety valve, pressure gauge, water pressure switch, water flow switch, sparker, pulse controller, piezo cable, pulse igniter, blade Burner and so on...



Related Products